Table of Contents
Advertisement
AUTOMATIC
Automatic Installation
INSTALLATION
Searching
O%.....................100%
0
1
BBC1
2
BBC2
3
ITV
4
...
.
...
.
...
.
...
AUTOMATIC
Automatic Installation
INSTALLATION
0
5
1
6
2
7
3
8
4
9
(Selection Mode)
MANUAL
System
INSTALLATION
Search
Programme No
Store
After the new or extra TV channel has been stored, the TV automatically transfers the TV channel(s) to the video recorder provided with the
EasyLink function. The message: EasyLink : Downloading Presets ... appears at the bottom of the screen.
The programme list of the video recorder is now equal to the one of the TV.
Installation
6
Automatic installation
10
...
11
...
12
...
13
...
..
...
..
...
..
...
..
...
Off
Manual installation
10
11
12
13
...
In the Automatic installation menu select
press the OK key to activate the searching. All TV channels are searched for
and stored automatically.
Wait until the Searching bar at the bottom of the screen has disappeared.
If a cable system or a TV channel which broadcasts ACI (Automatic Channel
Installation) or a TV channel transmitting a teletext page with the frequencies
and programme names of all the TV channels which can be received, is
detected, the search is stopped and the programme list appears.
The programme list is automatically filled with all the programme numbers
and names of the TV channels transmitted.
It is possible that the cable company or the TV channel displays a broadcast
selection menu. Layout and items are defined by the cable company or the TV channel.
Make your choice with the cursor and press the OK key.
Press one of the colour menu keys on the door of the remote control to
return to the
INSTALLATION
Searching for and storing TV channels is done channel by channel.
You must go through every step of the Manual Installation menu.
is only present and lights up if the country selected also
Selection Mode
offers the channel option (C-channels for aerial channels, S-channels for cable
channels).
You can choose either channel or frequency mode.
Select the TV system
Select the country or part of the world from where you want to receive the
TV channel.
If you are connected to a cable system, select your country or part of the
world where you are now located.
Search for a TV channel
The frequency or the channel number increases until a TV channel is found.
In case of poor reception, you can improve the reception by adjusting the
frequency with the - P + keys.
Direct selection of a TV channel
If you know the frequency, the C- or S-channel number, enter the 3 digits of
the frequency directly with the digit keys 0 to 9 (e.g. 048).
Enter the programme number.
To store your TV channel, select
Repeat steps
to
to store another TV channel.
To exit from the menu press one of the colour menu keys on the remote
control.
with the cursor left/right and
On
menu.
and press the OK key.
Store
Advertisement
Table of Contents
