Connect Your Computer - Philips FTR9952/19S User Manual

MAINS INLET L
AUDIO IN
VGA IN
R
5
1 2 2

Connect your computer

22
Connect your computer
AUDIO OUT
VGA OUT
4 3
* Apple Macintosh is a registered trademark of Apple Computer, Inc.
Connect one end of a VGA cable supplied to the video card of the computer
and the other end to the
VGA MONITOR IN
the receiver box or at the
VGA IN
in case you have no receiver box connected to the monitor.
See the instructions with the monitor.
Fix the connectors firmly with the screws on the plug.
In case of a Multimedia computer, connect audio cables to the audio outputs
of your Multimedia computer and to the
(left) above the
L VGA MONITOR IN
or to the and
AUDIO IN L R
Connect your Apple Macintosh* computer
Attention: Macintosh computers with separate H and V synchronisation signals
can be used together with a switchable adaptor. Macintosh computers with
Composite Sync and Sync on Green signals may need another special adaptor or
cable. Contact your dealer.
Connect the switchable adaptor for Apple video connectors to one end of a
VGA cable.
Put the DIP switches on the adaptor in the following positions :
1 2 3
off off on
Connect the end of the VGA cable with the adaptor to the video card of the
computer and the other end to the
back of the receiver box or at the
monitor in case you have no receiver box connected.
Screw the connectors down firmly.
15-pin D sub
(2-row)
To reproduce computer screen information and/or programmes, see p. 25.
connector at the rear side of
connector at the back of the monitor
AUDIO MONITOR IN R
connector at the back of the receiver
at the back of the monitor.
4
on
connector on the
VGA MONITOR IN
connector on the back of the
VGA IN
15-pin mini D sub
(3-row)
(right) and