Log Catcher Installation - Dirty hand 107036 Operation Manual

Log Catcher Installation (30-Ton)
NOTE: The 25-Ton Log Splitter does not come with a log
catcher, which is available as an accessory.
1. Rotate Beam & Cylinder Assembly down from upright
position and lock in place with the release pin.
2. Install the Log Catcher Assembly
1.5 x 30mm ; Flat Washer, M10
2
Hex Nut, M10 x 1.5
; in 2 places. Tighten hex nuts securely with a 17mm socket
6
wrench and tighten button screws with 6mm hex key wrench.
12
with Hex Bolts, M10 x
1
; Lock Washer, M10
3
; and Button Screw, M10 x 1.5 x 30mm
5
Item # Part # Description
1 100157 Log Catcher Grate
2 100165 Hex Bolt, M10 x 1.5 x 30mm, G8.8
3 100161 Flat Washer, M10
4 100089 Lock Washer, M10
5 100009 Hex Nut, M1 x 1.5, G8.8
6 100064 Button Screw,
M10 x 1.5 x 30mm, G8.8
;
4
Qty.
1
2
6
4
4
2