Phonebook; Restore Default Settings; Additional Handsets - Philips Faro M770 Short User Manual

Enjoy
4

Phonebook

Add record
1 Press [Menu] > [Phonebook] > [Add new].
2 Follow on-screen instructions.
Call from the phonebook
1 Press .
2 Select a record and press .
Call from the direct access memory
Press and hold on the keys in standby mode. The
availaibility of direct access memory is country
dependent.
Call log
Call from the call log
1 Press .
2 Select a record and press
.
Save record
1 Press > [Option] > [Save number].
2 Follow on-screen instructions.
Redial list
Call from the redial list
1 Press [Redial].
2 Select a record and press
.
Save record
1 Press [Redial].
2 Select a record and select [OK] > [Option] >
[Save number]
3 Follow on-screen instructions.
Telephone answering
machine (for M775 only)
Turn the answering machine on or off
1 Press [Menu] > [Answer machine] > [On/off].
2 Follow on-screen instructions.
• [On] > [Answer only] means the answering
machine is on. Calls are only answered,
messages are not recorded.
• [On] > [Answer & rec.] means the answering
machine is on. Calls are answered and
messages are recorded.
Listen to the incoming messages
Press [Menu] > [Answer machine] > [Play].
Register the handset or

additional handsets

You can register additional handsets to the base
station.
1 Press [Menu] on the handset.
2 Select [Services] > [Register], then press
[OK] to confirm.
3 Press and hold
on the base station for
10 seconds.
4 Enter the system PIN/passcode (0000).
5 Press [OK] to confirm the PIN/passcode.
Registration is complete in less than
»
2 minutes.
Note
The handset and the base station are GAP
compliant, which means they guarantee the
minimum functions: register a handset, take
the line, make a call and receive a call. The
advanced features may not be available if
you use them with other makes. To register
the handset to another GAP-compliant base
station, follow the registration procedure of
that base station.

Restore default settings

You can reset your phone settings to the original
factory settings, and recall the original PIN/
passcode.
1 Press [Menu].
2 Select [Services] > [Reset], then press [OK] to
confirm.
3 Follow on-screen instructions.