Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Philips SE4354S/05
Summary of Contents for Philips SE4354S/05
-
Page 3: Table Of Contents
Contents Important Information For your safety Installation requirements Need Help? What’s in the box? Your SE435 Overview of the handset Overview of the base station Main features of your SE435 Connect Install Call Phonebook Call log Clock & Alarm Personal Settings Advanced Settings Network Services Telephone answering machine (TAM) -
Page 4: Important Information
The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60-950. Need Help? For more information on troubleshooting and FAQs: Troubleshooting : page 56 Online Help www.p4c.philips.com Important Information... -
Page 5: What's In The Box
What’s in the box? The following accessories are included with your SE435: Base station Handset 2 AAA Battery door rechargeable batteries The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. -
Page 6: Your Se435
Overview of the handset LCD Screen Event LED Menu key/Left Soft key Talk key Keypad lock key Loudspeaker key Your SE435 Earpiece Microphone Up/Down Navigation keys Right soft key/ Redial list key/ Mute key Hang-up key Alphanumeric keypad Case key/ Pause key/ Ringer off key Intercom key... -
Page 7: Handset Keys
Handset keys Press Enter the main menu from stand-by mode. Select the function displayed on the handset screen directly above it. Go to redial list from stand-by mode. > Select the function displayed on the handset screen directly above it. Activate mute function during a call. - Page 8 Display icons & symbols In stand-by mode, several icons & symbols may be displayed on the handset. The handset is registered and within range of the base station. It blinks when the handset is out of range or is searching for a base. Battery symbol indicating 3 different battery levels.
-
Page 9: Overview Of The Base Station
Overview of the base station Paging key Previous message/ Replay message key Base station keys Page handset. Long press to start registration procedure. Long press to turn the telephone answering machine (TAM) On/Off. Increase speaker volume during message playback. Reduce speaker volume during message playback. Delete current message during message playback. -
Page 10: Main Features Of Your Se435
LED Message No display: Indicates that the answering machine is switched off. counter Blinking: Indicates number of new messages. Steady: Indicates number of old messages. 2 bars flashing: Indicates that there is no more memory left. Indicates the volume level (L0 - L9) when Indicates the current message number during playback. -
Page 11: Menu Navigation
• Return to previous menu 3) Select level or stand-by screen directly below it (right soft key > Your SE435 Action PHILIPS 08-08 key to scroll to your by pressing the key Alarm to scroll to your desired by pressing the key... -
Page 12: Connect
The position in which you placed the base station can have an effect on the range and performance of your SE435. Connecting the Base Station Place the base station in a central location near the telephone line socket and electricity sockets. Connect the line cord and the power cable to the proper connector at the back of the base station. -
Page 13: Install
Install battery Your SE435 is supplied with 2 rechargeable batteries allowing approximately up to 12 hours of talk-time and up to 150 hours stand-by time. Before using the handset, the batteries have to be installed and fully charged. Slide out the battery cover. Place the batteries as indicated and replace the cover. -
Page 14: Battery Life And Range
Battery life and range Talk time and stand-by time When the battery is fully charged, the talk time of your SE435 is approximately 12 hours and the stand-by time is approximately 150 hours. Low battery warning The battery level is shown at the top left of the handset screen. When the battery level becomes low, the low battery sensor alerts you by sounding an audible tone and blinking the battery icon. -
Page 15: Set Date And Time
Set date and time Press Scroll Clock & Alarm and press Date/Time. Press to select Enter current time (HH:MM) and current date (DD/MM/YY) and press WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. -
Page 16: Text And Number Entry
8 ù ü w x y z 9 ø . 0 , / : ; “ ‘ ! i ? * + - % \ ^ ~| For example, to enter the name “Philips”: Press once: P... -
Page 17: Default Settings
Press once: Philip Press four times: Philips By default, the first letter of a word is in upper case. Press lower case. Default settings Ringer Volume Earpiece Volume Speaker Volume Key Beep Auto pick-up Auto hang-up Babysit mode Alarm clock... -
Page 18: Call
Make a call Predialling Enter the phone number (maximum 24 digits). Press key to dial the number. Direct dialling Press Enter the phone number. Call from redial list > Press key in stand-by mode. Scroll to an entry in the redial list. Press key to dial the number. -
Page 19: Answer A Call
Answer a call When the phone rings, press Handsfree answering When the phone rings, press Incoming call has priority over other events. Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc. will be aborted. TIP If Auto Pick-up mode (see page 38) is activated, you can simply lift up the handset from its base... -
Page 20: Adjust Loudspeaker Volume
Press key again to return to normal mode. WARNING Activation of loudspeaker can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear. Adjust loudspeaker volume Press key to select from Intercom This feature is only available when there are at least 2 registered handsets. -
Page 21: Call Waiting
Three-party conference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required. Press to put the external call on hold (the caller can no longer hear you). Intercom is established immediately if there are only 2 registered handsets. -
Page 22: Phonebook
Your SE435 can store up to 250 phonebook memories, including 9 direct access memories ( Each phonebook entry can have a maximum of 24 digits for the phone number and 12 characters for the name. Access phonebook Press in stand-by mode or press and press The phonebook entries will be listed in alphabetical order. -
Page 23: Edit A Phonebook Entry
Group>, Scroll to a group (<No A long confirmation beep tone is emitted. You can assign individual contacts to specific groups of your choice. For example, phone numbers of all your co-workers. You can also assign a specific ring melody to that group (see "Group Melody"... - Page 24 Store direct access memory You can store up to 9 direct access memories (Key mode will automatically dial the stored phone number. Press , scroll (Key 1 Select a key be displayed. If there is no number stored for the selected key or if you want to change the number currently stored, press and select Add.
-
Page 25: Transfer Phonebook
Slide the SIM card between the retaining clips, microchip facing up, until it stops. Put the SIM card tray back in the slot on the base station and push into place until it latches. On the handset, press , scroll press Copy All Select... -
Page 26: Call Log
The call log can store up to 50 entries. If you have subscribed to Caller Line Identification (CLI), and provided the identity of the caller is not withheld, the name (or number) of the caller will be displayed together with the date &... - Page 27 Save redial list entry to phonebook > Press key in stand-by mode and scroll Press and scroll Copy to Phbk Enter name and press Edit number if necessary and press Edit the SMS Box number and press Default SMS Box is 9. To modify, press and then enter the number (0 to 9).
-
Page 28: Sms
SMS stands for Short Message Service. To benefit from this service, you must subscribe to Caller Line Identification Service (CLI) together with SMS service from your network provider. SMS messages can be exchanged with a phone (mobile or compatible fixed lines), provided the receiver has also subscribed to CLI and SMS services. -
Page 29: View Inbox Messages
Enter the destination phone number and press a phone number and press Enter the destination box number directly or scroll press (only for UK). By default, the destination box is 9 (the default destination box depends on the country). Press to send the message or scroll press If you select Send, the message will be sent immediately. - Page 30 Press to view the message content. TIP While reading an SMS, press sender’s number and the date and time of reception. When viewing the message content, you can press Reply Edit Copy to Phbk Delete Delete All To return to SMS menu, press Press key while viewing the message content/sender number/date/time stamp will abort the SMS function and dial the sender’s phone number.
-
Page 31: Draft Box
Edit the SMS Box number and press The default SMS Box is 9. To modify, press BACK and then enter the number (0 to 9). Scroll to select a group you wish to assign for this contact. Press to confirm. A long confirmation beep is emitted and the screen returns to display the message content. -
Page 32: Sms Settings
If you select Send, the message will be sent immediately. been sent successfully. Edit a Draft message While viewing the message content, press Scroll Edit and press After editing, press Refer to steps 5 to 7 in "Write and send new SMS" on page 28 to send the message or select Draft to overwrite the original message in the Delete a Draft message... - Page 33 SMS Box (only for UK) In order to send and receive SMS messages, there must at least be 1 SMS Box created. password is created by default. You can create a maximum of 10 SMS boxes password. To create a new SMS Box (only for UK) Press , press to select SMS, scroll...
-
Page 34: Default Sms Center
Scroll to the SMS box for which you wish to change the box number and press Scroll Change Box Nr Enter the new box number and press To set outgoing number The incoming and outgoing numbers of your SE435 are already set to work on your country network. We advise you not to modify these settings. -
Page 35: Clock & Alarm
Clock & Alarm Set date and time Clock & Alarm Press , scroll Enter current time (HH:MM) and current date (DD/MM/YY) and press Enter the date in Day/Month/Year format and the time in 24-hour format. A confirmation beep is emitted and the screen returns to previous menu. Once the date and time have been set, it will be memorized even if the batteries are removed from the handset or if there is a power failure. -
Page 36: Personal Settings
Handset Tones Ring Volume There are 5 ringer volume options (Silence, Low, Medium, To set ring volume Press , scroll select Ring Volume. Scroll to your desired volume level and press A confirmation beep is emitted and the screen returns to previous menu. When Silence is activated, the icon... -
Page 37: Group Melody
Personal Settings Group Melody To benefit from this feature, you must subscribe to Caller Line ldentification service. See "Caller Line Identification" on page 21. This menu enables you to select and set the melodies to be played when there is an external incoming call from a contact whose name is stored in your phonebook and is part of a group. -
Page 38: Handset Name
Handset Name You can name the handset and display the handset name in stand-by mode. The default handset name of your handset is PHILIPS. To rename the handset Press , scroll Edit the handset name and press A confirmation beep is emitted and the screen returns to previous menu. -
Page 39: Babysit Mode
Personal Settings Babysit mode You must have at least 2 handsets registered to your base station to be able to use this feature (see page 43 "To register an additional handset" ). This feature allows you to monitor e.g. the baby’s room. Place the handset in the room to be monitored. If the sound level around the microphone of the handset exceeds a certain threshold, the handset can automatically call another handset registered on the same base station. -
Page 40: Advanced Settings
Recall Time Recall time (or dial delay) is the time delay by which the line will be disconnected after you press can be set to short, medium or long. The default value of recall time that is preset in your SE435 should be the best suited for your country network and therefore you should not need to change it. -
Page 41: Call Barring
Advanced Settings To set dial mode Advanced Set Press , scroll Scroll Tone Pulse and press A confirmation beep is emitted and the screen returns to previous menu. Call Barring Call barring enables you to restrict selected handsets from dialling a phone number beginning with certain numbers. -
Page 42: Baby Call
Baby Call When activated, the Baby Call feature enables you to dial a number by pressing any key on your handset. This feature is very useful for direct access to emergency services. You can enter up to 24 digits for baby call number. If you have modified the Master PIN before and it is not the default 0000, you will be required to enter the Master PIN before you can activate or deactivate number. -
Page 43: To Register An Additional Handset
Advanced Settings Registration The procedures described below are the procedures that you will find in your SE435 handset. The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset. -
Page 44: Change Master Pin
Change Master PIN The Master PIN is used for setting call barring/baby call number and for registration/unregistration of handsets. The default Master PIN is 0000. The length of the PIN is 4 digits. This PIN is also used to protect the settings of your handset. -
Page 45: Auto Prefix
Advanced Settings Auto Prefix The maximum length of an auto prefix number is 5 digits. Once the number is set, it will be automatically inserted at the beginning of each number that will be dialled. To set auto prefix number Advanced Set Press , scroll... -
Page 46: Network Services
This menu provides a convenient means for you to access, activate or deactivate some network services that are subscription dependent. Contact your network provider for more information about these services. The default numbers and values that are preset in your SE435 should be the best suited for your country network and therefore you should not need to change them. -
Page 47: Voice Mail
Network Services Deactivate Call Forward Net. Service Press , scroll Scroll to the type of call forwarding option you wish to deactivate CallFwd UnAns) and press Deactivate Scroll and press The number string for that selected service will be dialled. When the number has been dialled, press Voice Mail This feature allows the caller to leave a voice message when you are unable, or do not wish to take a call... -
Page 48: Cancel Call Back
Cancel Call Back Setting Press , scroll Settings Scroll Enter the required number for cancelling of call back and press Activate Cancel Call Back Press , scroll Press to select Activate. The number string for that selected service will be dialled. When the number has been dialled, press Withhold ID Setting... -
Page 49: Telephone Answering Machine (Tam)
Telephone answering machine (TAM) Your SE435 features an answering machine that records unanswered calls when it is activated. The answering machine can store up to 99 messages within the maximum recording time of 15 minutes. Your SE435 base station answering machine control keys Paging key Previous message/ Replay message key... - Page 50 Telephone answering machine (TAM) LED Message counter Play Playback of new messages via handset Press , scroll The new messages will be played via the loudspeaker. During playback, you can: Adjust volume Return to play menu Repeat Next message Previous message Delete message Switch the playback to earpiece TIP You can also playback messages by pressing...
-
Page 51: Delete All
Telephone answering machine (TAM) Playback of old messages via handset Old messages can only be played if there are no new messages. The first recorded message will be played first and the next message will be played automatically until there are no more messages. Answ. - Page 52 Telephone answering machine (TAM) Set Outgoing Messages (OGM) Once the answering mode is set, you can choose to set your outgoing message as Personalised. The current selected mode is ticked. To change it, scroll Predefined Outgoing Messages If you set your OGM as Predefined, you can press The predefined OGM will be played and the screen will return to previous menu once it has finished playing.
-
Page 53: Answering Machine Settings
Telephone answering machine (TAM) Answering Machine settings Press , scroll Answ. Machine Ring Delay This is the number of rings before the answering machine answers and starts playing your greeting message. You can set the answering machine to answer after Press , scroll Answ. -
Page 54: Call Screening
Telephone answering machine (TAM) If the access code is correct, a long beep tone can be heard. If there are new messages, all the new messages will be played immediately and then stop when there are no more new messages. If there are no new messages, the answering machine will not play any messages. -
Page 55: Voice Language
Telephone answering machine (TAM) Voice Language This menu allows you to change the language of the predefined OGM. The availability of this menu and the language options available are country dependent. To set voice language Answ. Machine Press , scroll The current selected language is ticked. -
Page 56: Troubleshooting
Troubleshooting of the phone Problem icon is not blinking when the handset is placed on the base No dialling tone Poor audio quality icon is blinking The copy from my mobile phone SIM card to SE435 phonebook is not complete. Troubleshooting Causes •... -
Page 57: Information
Troubleshooting Problem Causes The handset displays “not • The procedure to add a available” • when attempting to add • Maximum number of handsets another handset to the base station • Base station is already busy • when using a handset Noise interference on your Your SE435 base station or mains radio or television... - Page 58 Troubleshooting of the Answering Machine Problem The answering machine does not record messages Remote control access does not work Cannot record outgoing message The SE435 hangs up during remote access The answering machine stops automatically Troubleshooting Causes • Memory is full •...
-
Page 59: Recycling And Disposal
Philips is committed to develop, produce and market products that cause no adverse health effects. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. -
Page 60: Index
Accessories 5 Advanced Settings 40 Alarm 35 Alarm tone 35 Answ. Machine 49 Answer a call 15, 19 Auto hang-up 38 Auto pick-up 38 Auto prefix 45 Babysit mode 39 Backlight 16 Base station 9 Basic operations 12 Battery level 14 Call 41 Call back 47 Call barring 41...