Honda VT750C2B Owner's Manual page 175

If You Have a Flat Tire
4. Reassemble the brake stopper arm.
Tighten the stopper arm nut to the
specified torque:
16 lbf·ft (22 N·m , 2.2 kgf·m)
5. Connect the brake rod to the brake arm.
6. Install the rear brake adjusting nut.
7. Adjust the rear brake pedal freeplay
(page 117 ).
8. Tighten the rear axle nut to the
specified torque:
65 lbf·ft (88 N·m , 9.0 kgf·m)
9. Tighten the axle holding bolt to the
specified torque:
20 lbf·ft (27 N·m , 2.8 kgf·m)
168
Taking Care of the Unexpected
10. After installing the wheel, apply the
brake several times. Check for free
wheel rotation after the brake is
released. Recheck the wheel if the brake
drags or the wheel does not rotate freely.
Used cotter pins may not effectively
secure fasteners. Always replace used
cotter pins with new ones.