Honda VT750C2B Owner's Manual page 106

Changing Oil
Refer to
Saf ety Precautions
LEFT REAR
(1)
(1) oil drain bolt
(2) oil fill cap
(3) sealing washer
(4) oil fill hole
on page 60
(2) (4)
(3)
Change the oil with the final drive at
normal operating temperature to assure
complete and rapid draining.
.
1. Place the motorcycle on its side stand
on a firm, level surface.
2. Place a drain pan under the oil drain
bolt ( ). 1
3. Remove the oil fill cap ( ), oil drain
bolt and sealing washer ( ).
4. After the oil has completely drained,
check that the sealing washer is in good
condition. Reinstall the oil drain bolt
with its sealing washer (or a new
washer, if necessary) and tighten it to
the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
Final Drive Oil
2
3
Servicing Your Honda
(cont'd)
99