Honda VT750C2B Owner's Manual page 168

4. Remove the front axle shaft ( ), wheel,
and side collar.
LEFT FRONT
(1)
(1) axle pinch bolts
(3) front axle shaft
Avoid pressing the brake lever when the
wheel is off the motorcycle. This will
force the caliper pistons out of the
cylinders. The result will be loss of brake
fluid. If this occurs, the brake system will
require service. See your dealer for this
service.
3 Installation
1.
(3)
If You Have a Flat Tire
Install the side collar and position the
wheel between the fork legs. Insert the
front axle shaft from the left side,
through the left fork leg and wheel hub.
To avoid damaging the brake pads,
carefully fit the brake disc ( )
between the pads.
Taking Care of the Unexpected
4
(cont'd)
161