Memory Installation - PCchips M575V12 User Manual

Hardware Configuration

Memory Installation

The mainboard lets you add up to 384MB of system
memory through SIMM and DIMM sockets on the
board. Four SIMM sockets on the mainboard are
divided into two banks: Bank 0 and Bank 1. Each bank
consists of two 72-pin SIMM modules and three 168-pin
DIMM sockets are divided into three banks: Bank 0,
Bank 1, and Bank 2. The mainboard supports the
following memory configurations.
Bank
Bank 0 2 x 4MB/8MB/16MB/32MB/64MB
SIMM1 & SIMM2
DIMM1 4MB, 8MB, 16MB, 32MB, 64MB, 128MB
Bank 1 2 x 4MB/8MB/16MB/32MB/64MB
SIMM3 & SIMM4
DIMM2 4MB, 8MB, 16MB, 32MB, 64MB, 128MB
Bank 2
DIMM3 4MB, 8MB, 16MB, 32MB, 64MB, 128MB
Total System Memory = Bank 0 + Bank 1 + Bank 2
Notes: 1. The following two types of DRAM module can not be used at
the same time: SIMM 1 & 2 and DIMM1 or SIMM3 & 4
and DIMM2.
2. Use 2 DRAM types: FPM/EDO faster than 70ns for SIMM
socket.
3. Use 3 DRAM types: FPM/EDO/SDRAM faster than 70ns
for DIMM socket.
15
Memory Module
or
or