Using Your Appliance; A) Operation Instruction - Brandt GE2626B Instruction Manual

2. Electrical connection
• Your installation must be protected by a 16 Amp thermal fuse.
• It is mandatory to use a power point with a ground terminal, connected in accordance with
current safety regulations.
• In your electrical installation, provide a device that is accessible to the installer, capable of
separating the appliance from the mains power and whose contact opening is at least 3 mm
at all of the poles.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
WARNING: Do not install oven over a range cooktop or other heat-producing appliance. If
installed near or over a heat source, the oven could be damaged and the warranty would be void.
The accessible surface may be hot during operation.
3)

USING YOUR APPLIANCE

a) Operation instruction
When the microwave oven is electrified, the oven will display "0:00", buzzer will ring once.
Clock Setting
Press the key
Turn the function selector to adjust the hour figures, the input time
should be within 0--23.
Press the key
Turn the function selector to adjust the minute figures, the input
time should be within 0--59.
Press the key
light.
, the hour figures will flash.
, the minute figures will flash.
to finish clock setting. will flash, and the time will
41
Display