Mitsubishi L02CPU User Manual page 241

(3) Low-speed timer
This type of timer measures time in increments of 1 to 1000ms. The default is 100ms (in increments of 1ms)
Project window
Timer counting starts when its coil is turned on, and the contact is turned on when the current value reaches the
set value. The timer's coil is turned off, the current value is changed to "0" and the contact is turned off.
[Program example]
[Timing chart]
X0 OFF
Coil of T0 OFF
Contact of T0 OFF
(4) High-speed timer
This type of timer measures time in increments of 0.01 to 100ms. The default is 10.0ms (in increments of 1ms)
Project window
The timer starts time measurement when its coil is turned on, and when it times out, the contact is turned on. If the
timer's coil is turned off, the current value is changed to "0" and the contact is turned off.
[Program example]
[Timing chart]
X0 OFF
OFF
T200 coil
T200 contact
OFF
[Parameter] [PLC Parameter]
Enter a value.
When X0 is turned on, coil of T0 turns on, and the
contact turns on after 1s. (when unit of the timer is set
to 100ms)
ON
ON
1s
ON
[Parameter] [PLC Parameter]
Enter a value.
High-speed timer indication
When X0 is turned on, coil of T200 turns on, and the
contact turns on after 0.5s. (when unit of the timer is set
to 10ms)
ON
ON
0.5s
ON
CHAPTER 5 DEVICES
[PLC System]
[PLC System]
5
239