Table of Contents
Advertisement
2. Monitoring and Configuring the Printer
SMTPC: username or password wasn't correct.
[response code] (information)
2
Snmp over IPv4 is ready
Snmp over IPv6 is ready.
Snmp over ipx is ready.
snmpd start.
started.
Started.
stopped
success key received
success but invalid key
Terminated.
There is problem in dhcp server operation.
trap account is unavailable.
unauthenticated
waiting for keys
WPA supplicant started
128
Message
Problem and solutions
number, or the network connection and
configuration.
Connection to the SMTP server failed, because the
specified SMTP user name is incorrect, or the
specified SMTP password is incorrect. Check the
SMTP user name and password.
Communication over IPv4 with snmp is available.
Communication over IPv6 with snmp is available.
Communication over IPX with snmp is available.
The snmpd service has started.
The direct print service has started.
The bonjour (rendezvous) function is enabled.
The supplicant is terminating.
The supplicant received the EAP-Success key.
The supplicant received a message reporting that
EAP authentication was successful, but the EAPOL
key was invalid.
The bonjour (rendezvous) function is disabled.
There is a problem with the DHCP server.
If multiple DHCP servers are active on the network,
check that they are assigning unique IP addresses
to each machine.
v3Trap cannot be sent. This could be because the
Trap destination account is different from the
account specified by the printer.
The authentication failed. The supplicant was
denied access to the access point, or was not
authenticated.
The supplicant is waiting for the session key.
The WPA supplicant has started.
Advertisement
Table of Contents
