Table of Contents
Advertisement
2. Monitoring and Configuring the Printer
add_sess_ipx: community <communityname>
already defined.
2
adjust time server <NTP server name> offset: xx sec. ncsd tells you the timing of the NTP server and
authenticated
authenticating
Authentication mode mismatch
Client EAP method rejected
Client password rejected
Client TLS certificate rejected
cipher suite mismatch
connecting
124
Message
Problem and solutions
TRAP. Specify the host IPX address for the TRAP
destination.
The same community name already exists. Use
another community name.
whether or not the time system clock is set.
NTP Server: NTP server name
offset: number of seconds of delay (minus number
if a time in advance is specified)
The supplicant is authenticated.
The supplicant is authenticating with the access
point (EAP or WPA).
The authentication mode of the access point is
different from the authentication mode of the
supplicant.
Use the authentication mode between the access
point and the supplicant.
The authentication mode of the access point is
different with the authentication mode of the
supplicant.
Use the same authentication mode between the
access point and the supplicant.
The client's password was rejected. Check the client
password.
The client's TLS certificate was rejected. Check the
certificate.
The uni-cast / multi-cast suite (TKIP/AES/WEP) of
the access point is different from the suite used by
the supplicant.
The supplicant is waiting for wireless connection to
the access point.
Advertisement
Table of Contents
