Section 2 - User Responsibilities, Machine Preparation & Inspection; Personnel Training; Operator Training; Training Supervision - JLG 1930ES Operation And Safety Manual

SECTION 2. USER RESPONSIBILITIES, MACHINE PREPARATION & INSPECTION
2.1

PERSONNEL TRAINING

The aerial platform is a personnel handling device; so it is nec-
essary that it be operated and maintained only by trained per-
sonnel.
Persons under the influence of drugs or alcohol or who are
subject to seizures, dizziness or loss of physical control must
not operate this machine.

Operator Training

Operator training must cover:
1. Use and limitations of the controls in the platform and
at the ground, emergency controls and safety systems.
2. Control labels, instructions, and warnings on the
machine.
3. Rules of the employer and government regulations.
4. Use of approved fall protection device.
5. Enough knowledge of the mechanical operation of
the machine to recognize a malfunction or potential
malfunction.
6. The safest means to operate the machine where over-
head obstructions, other moving equipment, and
obstacles, depressions, holes, drop-offs.
3121655
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION & INSPECTION

Training Supervision

Training must be done under the supervision of a qualified
person in an open area free of obstructions until the trainee
has developed the ability to safely control and operate the
machine.

Operator Responsibility

The operator must be instructed that he/she has the responsi-
bility and authority to shut down the machine in case of a
malfunction or other unsafe condition of either the machine
or the job site.
– JLG Lift –
7. Means to avoid the hazards of unprotected electrical
conductors.
8. Specific job requirements or machine application.
2-1