Adjust Tab: Black And White - Kodak I5X50 SERIES Setup Manual

Adjust tab: black and white

A-61848 / TWAIN October 2016
The options available on the Adjust tab depend on the Scan as
selection on the General tab. The following options are based on a
Scan as selection of Black and White.
Conversion quality — these settings effect how the scanner analyzes
a grayscale version of the document which is used to produce the black
and white electronic image.
• Best - Intelligent QC: this performs the same analysis as Best with
the additional benefit of Intelligent QC (Quality Control). For
challenging documents the grayscale version of the document is
produced, allowing you final control over image quality within your
application software.
NOTE: This option is only available with Kodak Capture Pro
Software. Refer to the software's documentation for more
information.
• Best (iThresholding): the scanner analyzes each document to
produce the highest quality image. This option allows scanning of
mixed documents with varying quality (i.e., faint text, shaded
backgrounds, color backgrounds) and when scanning with consistent
document sets.
• Normal (ATP - Adaptive Threshold Processing): allows you to
determine the optimal settings to produce the desired image quality.
This option works best when scanning with consistent document
sets. You may also want to use this option if you have difficult
documents such that you cannot find a Contrast setting for Best that
produces the desired quality.
• Draft (Fixed): allows you to select the grayscale threshold used to
determine if a pixel is black or white. This option works best for high
contrast documents.
17