Ricoh MPC 1800 Quick Manual page 17

3 Using the Basic Copier and Fax Functions
Sending a Fax (Immediate Transmission)
Check that "Ready" is displayed on the screen.
If any other function is displayed, press the {Facsimile} key on the left of the control panel.
Check that the Memory Trans.
indicator is not lit.
If it is lit, Memory Transmission mode is selected. In this
case, press the {Memory Trans.} key.
Load originals in the ADF/ARDF.
Specify the scan settings according to your original.
⋅ Type of Original: Text or Photo
⋅ Resolution: Standard, Detailed, or Fine
⋅ Image Density (Contrast): Manual Image Density (five levels)
Using the number keys or a Quick
Dial key, specify the destination.
If you make a mistake, press the {Clear/Stop} key, and
then re-enter the destination number.
Press the { { { { { Start} } } } } key.
⋅ To fax multiple-page originals from the exposure glass: after the
first page is scanned, place the next original on the glass and
press the {Start} key within 10 seconds. You can also change
the scan settings (as in step 4).
⋅ After placing the last original on the glass, press the {q} key.
⋅ For details about searching for a destination, see "Searching for a Destination in the Address Book", Fac-
simile Reference on the supplied CD-ROM.
⋅ For details about the scan settings, see "Scan Settings", Facsimile Reference on the supplied CD-ROM.
⋅ To specify a destination using a Quick Dial key, see "Using the Quick Dial Keys", Facsimile Reference on
the supplied CD-ROM.
BDZ013S
17