Ricoh MPC 1800 Quick Manual page 16

3 Using the Basic Copier and Fax Functions
Sending a Fax (Memory Transmission)
There are two types of transmission: Memory Transmission and Immediate Transmission.
Memory Transmission
Transmission starts automatically after the original is stored in memory.
Immediate Transmission
Immediately dials the destination number, and while scanning the original, sends to it.
Check that "Ready" is displayed on the screen.
If any other function is displayed, press the {Facsimile} key on the left of the control panel.
Check that the Memory Trans.
indicator is lit.
Normally, Memory Transmission mode is selected by
default.
If the indicator is not lit, Immediate Transmission mode
has been selected. In this case, press the {Memory
Trans.} key.
Load originals in the ADF/ARDF.
1. Adjust the document guide according to the size of
2. Square the originals and load them print side up in
Specify the scan settings according to your original.
⋅ Type of Original: Text or Photo
⋅ Resolution: Standard, Detailed, or Fine
⋅ Image Density (Contrast): Manual Image Density (five levels)
Using the number keys or a Quick
Dial key, specify the destination.
If you make a mistake, press the {Clear/Stop} key, and
then re-enter the number.
Press the {Start} key.
If you scanned the original from the ADF/ARDF, the scanned file is sent automatically. Wait until
the machine finishes sending the scanned file.
⋅ To fax multiple-page originals from the exposure glass: after the
first page is scanned, place the next original on the glass and
press the {Start} key within 60 seconds. You can also change
the scan settings (as in step 4).
⋅ After placing the last original on the glass, press the {q} key.
16
the originals.
the ADF/ARDF.
Do not stack originals above the limit mark.
Load paper so that the first page is on the top.
If you want to fax a single-page original or pages out of
a book, place the original directly onto the exposure
glass. For details, see step 5 on p. 14,"Using the Basic
Copier Functions"
You can load double-sided originals if you are using
the ARDF. For details about faxing double-sided origi-
nals, see "Two-Sided Transmission (Double-Sided
Transmission)", Facsimile Reference on the supplied
CD-ROM.
1) Limit mark 2) Document guide
BDZ006S
BDZ018S
BDZ009S