Serial Configuration; Ip Setting - Rextron NXMU-M220 User Manual

Serial Configuration

------------------------
I.

IP Setting

Telnet Host / client
telnet to IP 169.254.0.101 port 24
telnet 169.254.0.101 24
Use "root" to login.
List all boards' hostname and IP address : node_list.
Configure IP setting
Autoip : 169.254.xxx.xxx private IP domain is used and auto-generated on boot.
Dhcp client : Use DHCP client to get IP address.
Static ip : Use static IP address.
To configure IP mode : astparam s ip_mode mode
Where "mode" can be: autoip, dhcp, static
To configure static IP address :
IP : astparam s ipaddr xxx.xxx.xxx.xxx
Netmask : astparam s netmask xxx.xxx.xxx.xxx
If you want to save the setting into flash and keeps the setting after reboot:
astparam save
24