Table of Contents
Advertisement
4. Network Configuration
User may want to exchange casting mode between unicast and multicast, set up IP and
use EDID Copy function. There are two way to reach, browser and serial command.
2.1. To complete users' goal, configuration via browser is divided into two ways,
a. Typing Domain Name in the address bar
b. Typing IP in the address bar
Before starting take notice of differentiation between Domain Name and IP.
2.1.1. System configuration via Domain Name
a Domain Name is for Sender only.
b. It is suggested using "Safari" web browser or other web browsers like Google
Chrome, Firefox or IE..., etc. If you use other web browser which is not Safari you'll
need
to
http://developer.apple.com/opensource/
installation.
The same pair of Sender and Receiver should have identical ID (Rotary DIP
c.
Switch number)
d. Open web browser and insert the address: http://videolan-gateway0000.local
The four digits after the word "videolan-gateway" depends on the position of the Rotary
DIP Switch you've set. Please refer to the form below. For example, if the position is
set up as 7, then the address should be http://videolan-gateway1110.local
install
"bonjour
Part 1: Uni-Cast Configuration
SDK":
Go
and look for "bonjour SDK download" for
11
to
the
website
Hide quick links:
Advertisement
Table of Contents
