Table of Contents
Advertisement
3. EDID Configuration
EDID (Extended Display Identification Data) is greatly important which contains
information about manufacturer name and serial number, product type, maximum
image size, color characteristics, factory pre-set timings, frequency range limits, etc. In
some cases display problems may occur due to incorrect EDID communication
between the display monitor and the unit or inappropriate EDID data programmed by
display manufactures. Therefore, by adopting "EDID COPY" function, it will allow the
system to copy EDID information from EDID compliant displays in order to assure
accurate display performance.
● EDID Copy (on Receiver Unit only)
Step 1. Power off the unit
Step 2. Press and hold the button F2
Step 3. Power on the unit
Step 4. Release the button after 12 sec. (the Network Status LED flashes yellow)
NOTE:
1. Using HDMI or DVI for all monitors; do not mix them up in one system.
2. It is suggested using monitors with identical brand and type.
Part 1: Uni-Cast Configuration
10
Hide quick links:
Advertisement
Table of Contents
