Die-Cut Label Roll Paper; Die-Cut Label Paper; Specified Original Paper; Print Density Adjustment - Epson TM-L90 Manufacturing Manual

Confidential

3. DIE-CUT LABEL ROLL PAPER

3.1 Die-Cut Label Paper

Die-cut label paper is label paper that has a predefined size of labels with an interval between
labels.

3.2 Specified Original Paper

The following original paper types can be used for die-cut label roll paper:
• Single-color thermal label paper type no.:
HD-75
KL470
KL80GT
• Two-color thermal label paper type no.:
BR21

3.3 Print Density Adjustment

For best print quality and reliability, select the proper print density for the paper type used as
described in the table below. If printing is performed with a density that exceeds the density
described in the table below, the reliability is not guaranteed. Print density can be set with a
software command.
Original paper no.
HD-75, KL470, KL80GT, BR21

3.4 Paper to Use for High Speed

If any of the following original paper types of thermal paper are used, the memory switch for the
customized value setting can be used to set the maximum print speed up to 150 mm/s {5.91
(level 9). Default is 120 mm/s {4.72"/s}:
• HD-75, KL470, KL80GT

3.5 Requirements for Die-Cut Label Paper Thickness and Peeling Strength

Requirements for the thickness of the die-cut label paper, peeling strength against backing
paper, and the adhesive agent that can be used with the printer are shown in the figure below:
Thermal paper (label)
Thickness: 70 ~ 92 µm
Nippon Paper Industries Co., Ltd.
NAKAGAWA MFG (USA). Inc.
(Face stock is Kanzaki Specialty Paper (USA))
NAKAGAWA MFG (Germany). GmbH.
(Face stock is KANZAN Spezialpapiere GmbH (Germany))
OJITAC Co., Ltd.
Die-Cut Label Paper Thickness Requirements
TITLE
TM-L90
Roll Paper
Manufacturing Guide
Density level
130%
Adhesive agent (acrylic emulsion)
Thickness: 9 ~ 21 µm
Peeling strength (against backing paper)
0.098 N/25 mm or more (JIS Z0237)
Backing paper
(separation paper)
Thickness: 41 ~ 71 µm
SHEET
REVISION
A
" /s}
NO.
NEXT SHEET
5 4