Roll Paper Cannot Be Cut - Epson STYLUS PRO 4400 Reference Manual

For Mac OS 9.x, select the Automatic mode and move the
slider towards Speed in the Print dialog to increase print
speed. See "Making Settings in the Print Dialog" on page 112.
For Mac OS X, select Automatic mode and move the slider
towards Speed in the Print Settings selected in the Print
dialog to increase print speed. See "Mode" on page 184.
❏ Do not run too many applications at the same time. Close any
applications you are not using.
❏ Change the interface card of your computer to IEEE1394 or
USB 2.0.
Note:
IEEE1394 and USB 2.0 are available only with the following OS.
IEEE 1394:
Windows XP, Me, 2000
Mac OS 9.x
Mac OS X
USB 2.0:
Windows XP, 2000
❏ Delete unnecessary files to make room on your hard disk
drive.
Note for Windows:
Your computer may not have enough memory. For further tips, see
"Increasing the Print Speed" on page 89.

Roll paper cannot be cut

Try one or more of these solutions:
❏ Make sure that paper cutter cover is set correctly. See
"Replacing the Paper Cutter" on page 303.
Downloaded from ManualsPrinter.com Manuals
Problem Solver
8
8
8
8
8
8
8
8
8
8
8
8
337