Garmin G500 Reference Manual page 92

ALERTS
Alert
ROL NO COMP
RS-232 CONFIG
RS-485 CONFIG
SIMULATOR
STORMSCOPE
SVT DISABLED
SW MISMATCH
TAWS
TDB
TERRAIN DSP
TRAFFIC
TRAFFIC CONFIG
TRAFFIC FAIL
TRAFFIC STDBY
TRK LOST
TRK TRAFFIC
WX ALERT
WX RADAR
WX RDR SERVICE
WXR INPUT FAULT
XPDR1/2
80
• No data from one or more roll attitude sensors.
• RS-232 configuration error.
• RS-485 configuration error.
• Simulator Mode is active. Do not use for navigation.
• Stormscope has failed or connection is lost.
®
• Outside of terrain database coverage area.
• Terrain database resolution is too low.
• GDU software version mismatch. No GDU crossfill.
• External TAWS is not available. Internal TERRAIN-SVT alerting
enabled.
• External TAWS configuration mismatch.
• Airframe does not support Terrain database.
• Terrain or obstacle database error in TAWS-B or TERRAIN-SVT
only.
• ADS-B In traffic alerting has failed.
• ADS-B In traffic has failed.
• TAS/TCAS has been in standby for more than 60 seconds.
• TAS/TCAS is inoperative or connection is lost.
• ADS-B traffic data does not match configuration.
• Traffic device has failed.
• Traffic data is no longer displayed.
• Traffic is in Standby mode while airborne.
• Heading and track from active GPS is lost. HSI is using secondary
GPS track..
• Heading is lost. Traffic is now based on track.
• Possible severe weather ahead.
• Communication with weather radar is lost.
• Weather radar requires service.
• Weather radar is not receiving one or more inputs.
• GTX1 or GTX 2 requires service.
• GTX1 or GTX 2 is inoperative or connection to GDU is lost.
G500/G600 Cockpit Reference Guide
Description
190-00601-03 Rev H