Charts Page (Optional); Chart Information; Selecting A Chart - Garmin G500 Reference Manual

Chart Information

®
FliteCharts
FliteCharts resemble the paper version of FAA published terminal procedures
charts. The charts are displayed with high-resolution and in color for applicable
charts. The database contains procedure charts for the United States only. This
database is updated on a 28-day cycle. FliteCharts is disabled 180 days after the
expiration date and is no longer available for viewing upon reaching the disable
date.
ChartView™ (Optional with Enablement Card)
ChartView resembles the paper version of Jeppesen terminal procedures charts.
The charts are displayed in full color with high resolution. The MFD depiction
shows the aircraft position on the moving map in the plan view of approach charts
and on airport diagrams. ChartView requires an enablement card.
The ChartView database is updated on a 14-day cycle. ChartView is disabled
70 days after the expiration date and is no longer available for viewing upon
reaching the disable date.

Selecting a Chart

1) While viewing the Charts page of the FPL Page Group, press the SELECT soft
key to change the airport or chart.
2) Turn the small and large MFD knobs to select the airport identifier and press
ENT to accept the selected airport.
3) Turn the large MFD knob to select the desired chart.
4) Press ENT to display the desired chart.
NOTE: The chart for the selected destination airport or approach is
automatically loaded. If no flight plan is entered, the chart page will
default to the nearest airport.
190-00601-03 Rev H

Charts Page (Optional)

Soft Keys Found on Charts Page
G500/G600 Cockpit Reference Guide
FPL GROUP
71