Safety Notes - Kodak PIXPRO ORBIT360 4K User Manual

Safety Notes

Product Notes:
• Do not disassemble or attempt to repair this product by yourself.
• Do not handle this product improperly. This product may be damaged or permanently broken if dropped, punctured or crushed.
• Avoid directly touching the lens elements. Please use a professional soft lens cleaning cloth together with a gentle lens cleaning agent to wipe and clean the
camera lenses for optimal performance.
• Do not use corrosive, alcoholic or organic solvent containing agents to clean this product.
• Do not use or store this product in high temperature environments.
• Do not expose the lenses to strong light sources (e.g. direct sunlight, etc.) for extended periods of time.
• Do not use or store the product in a strong magnetic field environment.
• If the product is quickly transferred from a low temperature to a higher temperature environment, water condensation may occur inside the product due to
physical changes. In this case, it is recommended to wait until the product returns to normal room temperature before you turn it on again to operate.
• If a photo or video cannot be played back due to improper operation by the user, the Company shall assume no liability or responsibility for compensation.
• Keep the product in a dry and clean environment when you are going to store the product for long periods of time.
• Due to the characteristics of the electronic elements inside the camera, the temperature of the camera will increase (heat will be emitted) in the process of
use. Even though the temperature could be relatively high and heat is emitted from the surface of the camera, the camera is capable of shooting continuously
and operating properly. When the camera detects that the temperature of the camera body is within certain limitations it will power off automatically.
• In case of powering off due to increased temperature limitations, the camera can be powered on again for use after its temperature cools and returns to
normal.
Battery Notes:
• Please use the included Li-ion battery or replacement battery that is the same type as the one included.
• If the battery overheats during charging or using, stop charging or using immediately. Turn the camera off, carefully remove the battery and wait until it cools
down completely.
• Please keep the battery contacts clean and dry.
• Install the battery according to the positive and negative marks on the camera's battery compartment. Never force it into the battery compartment.
• If battery fluid leaks into the product, please contact our customer service center immediately. If battery fluid leaks onto your skin, rinse the area immediately
with clean water and seek immediate medical attention.
• To prevent the battery from being damaged, do not drop the battery, hit it with heavy objects or scratch it with sharp objects.
• Do not let the battery come in contact with metal objects (including coins) in order to avoid short-circuiting, discharging, excessive heating or possible
leakage.
• Do not heat the battery or throw it into a fire to avoid serious injury or a possible explosion.
• Remove the battery if the camera will be stored for a long period of time.
• Do not store the battery in high temperature environments.
• Using the battery in cold environments will result in much lower camera performance.
• Do not attempt to disassemble the battery by yourself.
• Please dispose of the battery properly and according to your local laws and regulations (national or regional).
5