Kodak PIXPRO ORBIT360 4K User Manual page 37

Successful Pairing Between the Camera and the Remote Control:
1. BLUETOOTH signal test press the
2. Using the mini remote control, all settings or parameters set in the camera's menus for shooting or recording will remain the same as initially set.
Upon successful pairing, both the remote control and camera will remember the BLUETOOTH information.
If the camera has been powered off for more than 12 hours, it is impossible to power on the camera directly with remote control.
Indicator Lamp Status Description:
1. If pairing is successful, the signal indicator light will turn green.
2. If pairing fails, the signal indicator lamp will turn red.
3. When recording or shooting with the Mini Remote Control, the shooting status indicator lamp will turn red.
4. When the remote control's battery level is less than 20%, the indicator light will turn orange.
Precautions:
1. If the Wi-Fi, NFC or HDMI connection or computer connection with the camera are enabled, the remote control function is not available.
2. The remote control operates at band 2.4GHz. Because microwave ovens, radios and amateur radios also use the same cyclic wave, it is possible to experience
radio interference.
3. Before using the remote control, please make sure there are no other electronic devices or radio stations, etc. around. Please use the camera and remote
control in an environment with better permeability and free from obstructions.
4. Radio interference and other circumstances may cause a malfunction of the remote control. Pay attention to the actual conditions of the camera when using
the remote control.
button. The camera will power off or on by pressing and holding the button for 1.5 seconds or more.
36