Table of Contents
Advertisement
Successful Pairing Between the Camera and the Remote Control:
1. To test if the camera's powered on or whether the remote control is paired successfully, press the
holding the
button for more than 1.5 seconds.
2. When the
button on the remote control is pressed to start recording or shooting, the camera will work with the current setting of the remote control.
Upon successful pairing, both the remote control and camera will remember the BLUETOOTH information.
If the camera has been powered off for more than 12 hours, it is not possible to power the camera on directly with remote control.
Indicator Lamp Status Description:
1. If pairing is successful, the signal indicator light will turn green.
2. If pairing fails, the signal indicator lamp will turn red.
3. During remotely controlled recording or shooting, the shooting status indicator lamp will turn orange.
4. When the battery level of the camera is less than 25% or the memory card is full, the battery/memory card indicator lamp will turn red.
Precautions:
1. If the Wi-Fi, NFC or HDMI connection or computer connection with the camera are enabled, the remote control function is not available.
2. The remote control operates at band 2.4GHz. Because microwave ovens, radios and amateur radios also use the same cyclic wave, it is possible to experience
radio interference.
3. Before using the remote control, please make sure there are no other electronic devices or radio frequencies, etc. around. Please use the camera and remote
control in an environment with better permeability and free from obstructions whenever possible.
4. Radio interference and other circumstances may cause a malfunction of the remote control.
button. The camera will power off by pressing and
40
Hide quick links:
Advertisement
Table of Contents
