Resetting The Ip Address Of The Machine - Canon imageRUNNER 2545i Client Manual

Resetting the IP Address of the Machine

If the message <Being set... Please wait. If the screen does not turn off after a
while, contact the System Manager.> persists on the touch panel display after the
machine is turned ON, the IP address of the machine may not be properly set.
Resume communications between the machine and the uniFLOW server by
resetting the IP address of the machine as described below.
1
Press
2
Enter the System Manager ID and System Password using
(numeric keys).
❑
Press [System Manager ID] ➞ enter the System Manager ID.
❑
Press [System Password] ➞ enter the System Password.
NOTE
The System Manager ID and System Password are both set to '7654321' as default.
3
Press
4
Check the IP address of the machine and set it on [Network
Settings].
NOTE
Set the IP address of the machine depending on the network environment you are
using.
5
Restart the machine.
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
EN-7
Managing the Machine with the uniFLOW Integration
(Additional Functions).
(Log In/Out) on the machine's control panel.
-