Connecting To The Wimax Network And The Internet - Cisco BWX360 Installation Manual

Cisco BWX360 WiMAX Outdoor Modem / engbt / 253306943 / Installation.fm / 07.04.2010
Setting the language
The user interface can be displayed in several languages, such as German, English,
French and Spanish. If your provider has not preconfigured default settings, the lan-
guage when you first call up the user interface is English.
If you wish to set your language, click on the Language button and select your lan-
guage.

Connecting to the WiMAX network and the Internet

If there is a connection between the PC or laptop and the outdoor modem, the Internet
connection must be configured and a radio connection must be established with the
base station. You do this in the Basic Setup Wizard.
1. Click the Basic Setup Wizard tab.
2. Click Next.
3. If you need help for a particular page, click the question mark button.
Entering the access data for the WiMAX network
On this page you enter the data for authentication of your device on the WiMAX base
station. You will need the access data supplied by your WiMAX operator for this.
Enter the access data and click Next.
Setting up Internet access
To allow users in your local network access to the Internet, set up the Internet connec-
tion of your device using the information supplied by your Internet provider.
Enter the access data and click Next.
Adjusting the antenna
1. Turn your Cisco BWX360 WiMAX Outdoor Modem towards the base station.
2. Click Next.
Establishing a radio connection with a WiMAX base station
The Basic Setup Wizard now scans the frequencies. This establishes an initial radio
connection with a WiMAX base station.
The frequency scan starts automatically. A progress bar indicates how far the fre-
quency scan has already progressed. In addition you will see in the Remaining time
area roughly how much time is still needed for the complete scan. Depending on how
the Cisco BWX360 WiMAX Outdoor Modem was preconfigured by the provider, the first
scan to establish a radio connection can take several minutes.
During the scan, the antenna must not be moved; this is the only way to
guarantee a complete scan with the current antenna alignment.
Installing the Cisco BWX360 WiMAX Outdoor Modem
19