Connecting The Indoor Unit - Cisco BWX360 Installation Manual

Wimax outdoor modem
Hide thumbs Also See for BWX360:
Table of Contents

Advertisement

Cisco BWX360 WiMAX Outdoor Modem / engbt / 253306943 / Installation.fm / 07.04.2010
Checking connection options in the house
Choose one of the following options for connecting the Ethernet cable in the house:
1. Fix the wall connection socket (LSA+ technology) in place and connect the cable
from outside to it. For this you will require a corresponding connection socket and
possibly a feeder tool for the LSA+ terminal. Feed an Ethernet cable with RJ45
plugs from the wall connection socket to the indoor unit (standard CAT5e, available
from your retailer in various lengths).
2. Connect the cable from outside directly to the indoor unit. For indoor use, you need
an RJ45 plug, see "Sources" on page 24. Feed an Ethernet cable with an RJ45 plug
from the indoor unit to a PC or router (standard CAT5e, available from your retailer
in various lengths).
Connecting an Ethernet cable to the outdoor modem
1. Slip the support sleeve over the unassembled cable to be screwed in later.
2. Attach a Phoenix connector to the end of the Ethernet cable that is outside. Please
read the instructions that come with the plug.
3. Insert the RJ45 plug of the assembled cable into the Ethernet socket of the outdoor
modem.
4. Slide the sleeve over the connected RJ45 plug and screw this into the Ethernet
socket. Make sure the connection is water-tight.
5. Use cable clamps to attach the cable to the mast. Please note that the cable must
be long enough to turn the antenna at a later stage.
6. Lay and attach the cable from the antenna mast along a path on which its function-
ality is not affected by external influences.

Connecting the indoor unit

Wall mounting (optional)
The indoor unit is fitted with two clips for wall mounting. Wall mounting is not absolutely
necessary, but is recommended to make the cable connections mechanically secure.
Use screw fittings, anchor fittings and cable clamps to mount the indoor unit on a
wall.
Make sure the LEDs are easily visible.
Installing the Cisco BWX360 WiMAX Outdoor Modem
15

Advertisement

Table of Contents
loading

Table of Contents