Cisco BWX360 Installation Manual page 15

Cisco BWX360 WiMAX Outdoor Modem / engbt / 253306943 / Installation.fm / 07.04.2010
Angled installation on a mast
Installing the modem using the supplied bracket allows two possible directions of incli-
nation (up or down) and four different tilt angles each, depending on how you attach the
bracket to the housing.
1. Fasten the bracket to the housing with the nuts welded onto the bolts:
– To have the modem facing up, fasten the bracket to the bottom edge of the hous-
ing; to have the modem facing down, fasten the bracket to the top edge of the
housing.
– Choose your preferred tilt angle: You get the largest tilt if you fit the bracket with
the smaller notch facing inward, and you get the smallest tilt if you fit it with the
larger notch facing outward.
2. Attach the housing to the mast using the
clamps and secure it with the nuts.
Installing the Cisco BWX360 WiMAX Outdoor Modem
13