Mounting The Lens To The Camera; Network Deployment - Vivotek IP7161 Quick Installation Manual

3

Mounting the Lens to the Camera

1. Mount the lens by turning it clockwise onto the camera mount until it stops. If
necessary, turn the lens counterclockwise slowly until it gets the best attitude.
2. Connect the lens cable plug to the camera connector.
1
For further setup, please refer to the lens' instruction manual inside the
lens package.
4

Network Deployment

General Connection (without PoE)
1. If you have external devices such as sensors and alarms, make connections from
general I/O terminal block.
2. Connect the camera to a switch via Ethernet cable.
3. Connect the supplied power cable from the camera to a power outlet.
3
2
5
2
1
1: Power +12V
2: Digital output
3: Digital input
4: Ground
5: AC 24V
6: AC 24V
7: RS485+
8: RS485-
Ethernet switch