Carrier ComfortChoice Touch User Manual page 55

PROGRAMMING THE THERMOSTAT
Perform the following steps to open the Each Day Schedule screen and program
the schedule:
1. Press the SETUP button on the Active Home screen.
2. Press the Schedule button on the Basic Setup screen.
3. Press the EACH DAY button.
4. Fig. 30 shows an example of a daily schedule. Press the EDIT button to
edit that particular schedule. Pressing the BACK button will return to the
Program Schedule menu screen without saving any changes made.
5. Press the PERIOD button to change the schedule for the period indicated
in the programming bar. The up or down arrow buttons with the PERIOD
button selected cycle through the periods of Wake, Day, Evening, and
Sleep. Refer to Fig. 31.
6. Press the START button to change the starting time of the period. Pressing
the up or down arrow buttons with the START button selected will in-
crease or decrease the display period start time in 15 minute increments.
7. Press the HEAT TO button to change the heating setpoint. Pressing the up
and down arrows with the HEAT TO button selected will increase or de-
crease the heating setpoint in one (1) degree increments.
55