Speaker And Power Supply Connection - Renkforce BSD-3023 Operating Instructions Manual

Electrical Connection

Speaker and Power Supply Connection

Vehicles equipped with an ISO system plug can be connected right to the ISO connection terminal at same plug
assignment (please verify first!). If the plug assignment deviates, use a vehicle-specific adapter available in trade for
connection.
For the contact assignment of the SD tuner ISO connection socket, see the following figure.
You can learn about the respective assignment of your car system plug from your car dealer.
System plug B (speaker connection)
(1) Speaker right, rear (+)
(2) Speaker right, rear (-)
(3) Speaker right, front (+)
(4) Speaker right, front (-)
(5) Speaker left, front (+)
(6) Speaker left, front (-)
(7) Speaker left, rear (+)
(8) Speaker left, rear (-)
System plug A (power supply)
(1) Not assigned
(2) Not assigned
(3) Not assigned
(4) Continuous current +12V
(5) Aerial control output
(6) Not assigned
(7) Ignition +12V
(8) Ground
60
Operating Instructions

English