Kaiser Baas Alpha Drone Complete User Manual page 10

Table of Contents

Advertisement

17
Left/Right Pitch (Tilt) Forward/Backward
Left/Right Roll (Tilt)
Indicators
There are LED lights on the underside
of the Alpha Drone that indicate when the
Alpha Drone is operational (constant) or
when the Alpha Drone is running low on
battery (flashing). It is important to pay
attention to the indicators to avoid an
uncontrolled landing, potentially putting
your drone and its surroundings at risk.
Modes
The Mode switch swaps the Yaw and
Pitch controllability on the thumb sticks.
High / Low
There are four sensitivity levels for the
Alpha Drone that can be cycled through
by using the High/Low button on the
Remote Control Transmitter.
These sensitivity levels increase and
decrease the overall responsiveness
of the thumb sticks on the Remote
Control Transmitter. The Alpha Drone
will start up in the lowest sensitivity level
25% responsiveness (advised level for
learners). Pressing the High/Low button
once will enter the medium sensitivity level
50% responsiveness.
The Remote Control Transmitter will beep
twice and indicate the sensitivity on the
Motor Power indicator. Pressing the High/
Low button again the Remote Control
Transmitter will beep three times and show
the high responsiveness setting of 75% on
the Motor Power indicator.
Pressing the High/Low button a third time
will assign the highest sensitivity level
which will be indicated by four beeps and
the Motor Power indicator displaying 100%
responsiveness. The 100% Motor Power
mode is for advanced pilots. This mode
also enables 360° flips. Please refer to the
360° Flips section for further information.
18

Advertisement

Table of Contents
loading

Table of Contents