Nikon Coolpix 4600 Repair Manual page 55

11-2. 1.5-m Adjustment
※ Before performing the 1.5-m adjustment in this machine, write the adjustment firmware on the camera. After
adjustment, be sure to write the product firmware.
Procedure for setting Adjustment firmware
1) Save the adjustment firmware and the product firmware in any folder.
2) Start up "DscCa1Di.exe" and click on "Firmware" button on the main menu to write the adjustment firmware.
(If the camera is activated after completing writing the adjustment firmware, "SERVICE" is indicated in red letters
on LCD panel.)
3) Follow the instructions of the below [How-to].
4) Start "DscCaDi140" and click "Firmware" on the main menu to write the product firmware.
就爱技术网 http://www.92jishu.cn
[Preparations]
• Set the Siemens star chart.
• Turn the power switch of the camera to on.
[Conditions]
• The siemens star chart should be A3-size or larger (Copy and enlarge A4-size siemens chart included in the
service manual for the usage.)
• Illumination over the object should be 400 lux ± 10%
• Set the siemens star chart and the camera (front surface of lens) at 150 cm ± 3 cm distance between them.
[How-to]
• Double click on "DscCa1Di.exe".
• Set the siemens star chart so that it comes center of the screen by checking through the viewfinder.
• Click "Focus" then "Yes".
• Lens adjustment values will appear on the screen.
Judgment standard: xd0=0 ± 55, xd7 = 0 ± 55, xd13= 0 ± 55 xd19 = 0 ± 55
• Click "OK".
カメラ
Camera
150cm±3cm
Siemens star chart
ジーメンス
スターチャート
- A31 ･ E4600 -
"Yes"
VAA32001-R.3652.A
Result of adjustment