SPEAKER HOLDER
・ Fit the center boss on the speaker holder [#233] into
the boss hole on the LCD holder [#231]. Then, turn
the speaker holder [#233] clockwise.
Boss hole position
就爱技术网 http://www.92jishu.cn
Speaker holder
[#233]
・ Adhere the spacer [#206].
LCD
・ Set the FPC.
・ Solder the lead wires [red] and [white].
・ Arrange the lead wires [red] and [white] as shown below. Fold the FPC and set the LCD [#239].
Spacer [#206]
Lead wires [white]
Lead wires [red]
- A19 ・ E4600 -
・ Solder the lead wires [red] and [white].
・ Arrange the lead wires [red] and [white] as shown
below.
Lead wire [white]
LCD [#239]
VAA32001-R.3652.A
Lead wire [red]
FPC