Nikon Coolpix 4600 Repair Manual page 44

TRIPOD SOCKET
・ Install the tripod socket [#201] by fitting onto the
hook.
ASSEMBLY OF FRONT COVER
就爱技术网 http://www.92jishu.cn
・ Install the release button unit [#020] by inserting its
convex section A into the notch B on the front cover
[#013].
・ Tighten the screw [#104].
Release button unit [#020]
Screw [#104]
・ Set the DC cover [#011].
Convex section A
Notch B
DC cover [#011]
- A20 ･ E4600 -
・ Adhere the spacer [#019] of the release button unit
as shown below.
※ The spacer [#019] is divided into three pieces from
the dotted line in the figure.
Spacer [#019]
・ Set the DC cover spring [#012].
DC cover spring [#012]
VAA32001-R.3652.A
Hook
Tripod socket [#201]
LCD [#239]
Set the convex section at
the top side.