Nikon Coolpix 4600 Repair Manual page 38

LENS UNIT
・ Set the spacer LPF [#209] and the optical filter [#210] into the lens unit.
・ As taking care about its direction, set the spacer [#211] into the lens unit.
・ Set the spacer insulator [#214], the lens mount [#213] and the CCD [#212] and solder them to the main PCB CP-1
[#218]. (Fig. 1)
・ Tighten the two screws [#106].
就爱技术网 http://www.92jishu.cn
Main PCB CP-1 [#218]
CCD [#212]
Lens unit
Spacer LPF [#209]
・ Adhere the spacer [#225].
・ Set the FPC.
Spacer [#225]
Lens mount [#213]
Spacer [#211]
Optical filter [#210]
Setting direction
Lens unit side
FPC
- A14 ･ E4600 -
Perform
soldering.
Screw [#106]
Spacer insulator [#214]
CCD side
VAA32001-R.3652.A
(Fig. 1)