Nikon Coolpix 4600 Repair Manual page 49
Hide thumbs
Also See for Coolpix 4600:
- Owner's manual (128 pages) ,
- Manual (140 pages) ,
- User manual (128 pages)
Table of Contents
Advertisement
4. Initial image data writing and Firmware upgrading
Write the data of initial images, and go on to upgrade the firmware.
Device
・ AC adapter (EH-62B)
・ Upgrading SD card X 1
[How to create an upgrading SD card]
1) Format SD card on PC.
2) Create a folder named "firmware" in the root directory of the SD card.
3) Copy "firmware.bin" into the created folder.
4) Copy "nanddat.bin" into the root directory of the same SD card.
Note) When only firmware upgrading is performed without replacing CP-1 PCB, copying "nanddat.bin" into the SD card is
就爱技术网 http://www.92jishu.cn
NOT necessary.
Procedure
・ Turn the camera OFF and connect the AC adapter.
・ Insert the upgrading SD card into camera.
・ Set the mode dial to "SETUP" and turn power ON.
・ Highlight and select "Firmware version" to display the menu for data-writing of initial images. (Fig.1)
・ Select "Yes", and press the decision button to carry out data-writing of initial images. (Fig.2)
Note: Do NOT turn power OFF during upgrading.
(Fig.1)
(Fig.2)
- A25 ･ E4600 -
VAA32001-R.3652.A
Advertisement
Table of Contents
