Getting Started; Wlan Connection (Wireless Network); Radio - Connecting And Starting Up; Initial Setup - Hama IR50 Operating Instructions Manual

5. Getting started

5.1 WLAN connection (wireless network)

• Ensure that the router is switched on, is functioning
correctly and that there is a connection to the internet.
• Activate the WLAN function of your router.
• Follow your router´s operating instructions as regards
the correct functioning of the WLAN connection.
• A detailed description of how to configure the
LAN connection is given in the Wireless network
connection (LAN) section.
5.2 Radio – Connecting and starting up
Connect the network cable to a properly installed
and easily accessible network socket. The power supply
unit is suitable for mains voltages between 100 and 240 V,
and is thus operable on almost any AC power grid. Please
note that a country-specific adapter may be necessary.
You can find an appropriate selection of Hama products
at www.hama.com.
Note
• Only connect the product to a socket that has been
approved for the device.
• When using a mult-socket power strip, make sure
that the sum power draw of all the connected devices
does not exceed its maximum throughput rating.
• The electrical socket must always be easily accessible.
• If you will not be using the product for a long period
of time, disconnect it from mains power.
Once the product has been connected to mains power,
initialisation takes place. The radio starts up.
To assist you in fi st-time setup of the radio,
5.4. a Setup Wizard is provided.

5.3 Initial setup

When it is first connected to the power supply, a list of
available languages for the menu is displayed. Proceed
as follows to set your preferred language.

5.4 Setup wizard

Once a language has been set, the setup wizard offers to
assist you with fi rst-timesetup. Choose YES to start it or
NO to skip:
Note – Starting up with or without
the setup wizard?
• We recommend using the setup wizard (YES) to
quickly and easily confi gure the time, date, internet
connection, etc.
• If you wish to skip setup with the setup wizard
anyway, choose NO. All of the settings configured
by the setup wizard can be configured or changed
individually in the System settings menu. Alternatively,
you may restart the setup wizard at any time.
• Next, choose YES or NO to define whether the setup
wizard should start automatically next time the radio
is started up. You are in the main menu.
7
Desired language, for
example German (German)
YES
NO