Settings; Dip Switch Settings - BMW i wallbox connect Installation Instructions Manual

SETTINGS

DIP switch settings

Note
Changes to the DIP switch settings take effect only after a restart of the Wallbox! To do this,
press the Service button for 1 second, or switch the supply voltage off and back on.
ATTENTION
If the Service button is pressed for too long (approx. 5 seconds), then this can delete the
RFID cards.
Note
Switches which are not described here have no effect on the functions of the device.
DIP switches
The DIP switches are used for addressing
and configuring the Wallbox, and are located
underneath the connector panel cover.
DSW1 configuration, DIP switch at top
DIP switch example
For more detailed explanation, the illustration
shows the position of the DIP switches for the ON
and OFF states.
37