Intended Use; About This Manual; Transporting The Wallbox - BMW i wallbox connect Installation Instructions Manual

Intended use

The Wallbox is a charging station for indoor and outdoor use, by means of which
electric or plug-in hybrid vehicles can be charged. It is not permitted to connect other devices, e.g.
electrical tools! The Wallbox is intended to be fitted to a wall or a mounting pillar. For installation and
connection of the Wallbox, the applicable national regulations must be complied with.
In all cases, intended use of the device includes compliance with the environmental requirements for
which this device was developed.
The Wallbox was developed, manufactured, tested, and documented in compliance with the applicable
safety standards. Therefore, if instructions provided for intended use and the safety instructions
are complied with, under normal circumstances no risks arise from the product in terms of material
damage or the health of persons.
The instructions in this manual must be followed exactly. Otherwise, sources of danger could be
created, or safety devices could be made ineffective. Regardless of the safety instructions provided in
this manual, the safety and accident prevention regulations corresponding to the individual application
case must be complied with.
Because of technical or legal restrictions, not all variants/options are available in all countries.

About this manual

This manual and the functions described are valid for devices of the type:
BMW i Wallbox Connect
This manual is intended exclusively for qualified personnel. These are persons who, on the basis of
their specialist training, knowledge, and experience, as well as knowledge of the applicable standards,
can assess the tasks assigned to them and recognize possible dangers.
The images and explanations in this manual are based on a typical model of the device. The model of
your device may be different from this.
Please refer to the operating instructions for the device for information and instructions on operation.

Transporting the Wallbox

For subsequent transportation of the Wallbox, the device must be packed appropriately, so that
damage does not arise to the casing.
It should also be ensured that the casing is completely closed for transportation and all screws and
bolts are tightened.
12