Removing The Connector Panel Cover - BMW i wallbox connect Installation Instructions Manual

Removing the connector panel cover

The connector panel cover needs to be removed only if one of the additional functions,
e.g. LAN or domestic connection monitoring is used, or the Wallbox is to be permanently
connected to the power network.
ESD
Risk of damage! Electronic components can be destroyed by touching!
Before working with assemblies, carry out an electrical discharge by touching a metallic
grounded object!
20
2. On the underside, swing the casing cover
forwards a little 2.
3. Now unhook the casing cover upwards 3.
Note
In order to avoid scratches or other
damage, store the casing cover in its
packaging.
1. Release the four screws with which the
connector panel cover 1 is mounted.