Description; Läs Bruksan-Instrumentet Laserklass - Hilti PML 42 Operating Instruction

On the tool
C A U T I O N
LASER RADIATION - DO NOT
STARE INTO BEAM
620-690nm/0.95mW max.
en
CLASS II LASER PRODUCT
Do not stare into the beam.
Laser warning plates for the USA in accordance with CFR
21 § 1040 (FDA).

2 Description

2.1 Use of the product as directed
The PML 42 is a self-leveling line laser which allows leveling and alignment work to be carried out quickly and
accurately by a single person. The tool projects two laser lines (horizontal and vertical) and a line intersection point.
The lines and line intersection point have a range of approx. 10m. Range depends on the brightness of ambient light.
The tool is designed for mainly indoor use and is no substitute for a rotating laser.
When used for outdoor applications, care must be taken to ensure that the general conditions are similar to those
encountered indoors. Possible applications are:
Leveling power outlets, cable trays, radiators and in other items in installation work.
Leveling suspended ceilings.
Leveling and aligning doors and windows.
Transferring heights.
Vertical alignment of pipes.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
Modification of the tool is not permissible.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
The tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used
not as directed.
2.2 Features
The PML 42 levels itself automatically within a range of approx. 5°.
Self-leveling takes only approx. 3 seconds.
When the self-leveling range is exceeded, the laser beams blink to warn the user.
The PML 42 is characterized by its ease of operation and use, its rugged plastic casing and ease of transport due to
its compact dimensions and light weight.
The tool can be used together with the PMA 31 laser receiver.
In the normal operating mode, the tool switches itself off after 15 minutes. Sustained operating mode can be activated
by pressing and holding the on/off button for four seconds.
2.3 Items supplied with the cardboard box version
1 Line laser
1 Soft pouch
4 Batteries
1 Operating instructions
1 Manufacturer's certificate
2
Location of identification data on the tool
The type designation and serial number can be found on
the type identification plate on the tool. Make a note of
this data in your operating instructions and always refer
to it when making an enquiry to your Hilti representative
or service department.
Type:
Serial no.: