Honda CRF450R 2009 Owner's Manual & Competition Handbook page 68

Clutch System
9. Apply oil to a new O-ring (9) and install it in
the groove of the clutch cover (10).
10. Install the cover by tightening the five cover
bolts in a crisscross pattern in two or three
steps to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
(9)
(10)
(9) O-ring (new) (10) clutch cover
11. Lubricate the dust seals (11) and rear brake
pedal pivot bolt (12) with urea based multi-
purpose grease or equivalent.
12. Apply locking agent to the brake pedal pivot
bolt threads.
13. Install the dust seals into the rear brake pedal
(13).
62
Servicing Your Honda
14. Install the pivot bolt with the washer (14) and
tighten the pivot bolt to the specified torque:
27 lbf·ft (36 N·m, 3.7 kgf·m)
Connect the brake pedal return spring (15) if
it is removed.
(11)
(12)
(15)
(11)
(11) dust seals (14) washer
(12) brake pedal pivot bolt (15) brake pedal return spring
(13) rear brake pedal
15. Fill the crankcase with transmission oil (page 49).
(13)
(14)