Table of Contents
Advertisement
Compro NC420 / NC450
Voice Communication
Pressing the [Communicate]
through the speaker connected to the IP camera's audio line out. To talk through the external speaker
connected to the IP camera, place your cursor on the [Communicate] button (the tool tip "Right click to setup"
will appear), and right-click on the button and select [Setting] to choose input device and input source.
Having configured the device, please hit the [Communicate] button, (which then shall remain in "pressed"
status for 90 seconds and automatically be released later, unless it is hit again) and talk through the
microphone.
5-4
Voice Communication
button allows you to speak into your PC microphone and broadcast
Figure 5-3. Communication setting
Notice!
When using the voice communication feature, you may experience
various degrees of delay between transmission from the computer
and playback on the camera end depending on the condition of your
network environment.
Advertisement
Table of Contents
