Table of Contents
Advertisement
3.
Pull the hard drive assembly away from connector to remove it (3).
4.
To remove the hard drive bracket, remove the two Phillips PM3.0×3.0 screws (1) that secure the bracket
to the hard drive.
5.
Remove the hard drive bracket from the hard drive (2).
6.
To remove the hard drive connector board, disconnect the cable from the board (1).
7.
Remove the two Phillips PM2.0×3.0 screws (2) that secure the hard drive board to the computer.
Component replacement procedures
51
Hide quick links:
Advertisement
Table of Contents
