Skoda OCTAVIA Owner's Manual page 198

Store route
In the area , tap the function surface Save.
▶ A
▶ Save the edited route as a new route or replace the existing saved route.
The route is stored in the route list
Stop route guidance
▶ In the area , tap the function surface stop .
A
Route change in the map
Only valid for Infotainment Columbus.
Fig. 233 Route change in the map / route transit point
A route in which no waypoints are contained, can be changed during route
guidance by adding a transit point.
Add a transit point
›
In the Navigation main menu, tap on function surface  → Change route in map.
›
Touch the screen in the route field and move the cross-point to the desired
location on the map, e.g. , move
A
The transit point is added to the route
B
›
Tap on the function surface  .
Then a route is recalculated and the route guidance starts.
Customise transit point
›
In the Navigation main menu, tap on function surface  → Change route in map.
›
Touch the transit point and move to a different location on the map.
B
›
Tap on the function surface  .
Then a route is recalculated and the route guidance starts.
196
Infotainment
» page 196.
» Fig. 233).
» Fig. 233.
Remove transit point
›
In the Navigation main menu, tap on function surface  → Change route in map.
›
Tap on function surface Delete waypoint.
›
Tap on the function surface  .
Then a route is recalculated and the route guidance starts.
route list
In the route list, it is possible to create routes, save, delete, or start navigation.
New route
›
In the Navigation main menu, tap on function surface  → Routes → New route.
Insert a route destination in one of the following ways.
›
Tap on function surface Name destination and enter a new destination.
›
or: Tap on function surface Destinations and select a destination from the list
of saved destinations.
›
To save the created route, tap the function surface Store.
›
Tap the function surface Startto start route guidance.
route import
A in the user profile on the website ŠKODA Connect Portal created route can
be imported into the infotainment memory.
A prerequisite for importing the route is that the Infotainment Online
services are activated.
If the created route sent to the infotainment, after switching on the ignition in
the infotainment screen automatically a message about a new route with the
option to import this displayed.
If the route is sent to the Infotainment system when the ignition is switched
on, the Infotainment system will only offer the route import after the ignition
is switched on again (the ignition must be switched off for at least 15 minutes).
The update can be carried out manually as follows.
›
In the Navigation main menu, tap on function surface  → Routes .
›
or: tap on the sensor field and then on the function surface  →  .

The route list is displayed.
›
The function surface import routes Tap.
If a new route available, then a message is displayed on the Infotainment.
» page 11
