Skoda OCTAVIA Owner's Manual page 135

Switching on
›
Press the button  on the multifunction steering wheel or the
field on the Infotainment (does not apply to Infotainment Columbus).
The main menu is displayed » Fig.
Switching off
›
Press the button twice  on the multifunction steering wheel or the
sensor field on the Infotainment twice (does not apply to Infotainment Co-
lumbus).
›
or: Issue the voice command "End voice control".
Operation principle
In the voice control main menu » Fig. 177
commands for the individual menus.
Other voice commands are displayed by tapping the respective function sur-
face, if required, by issuing the name of respective command (e.g. navigation).
The screen shows the following
Context-dependent:
A

The system is waiting for a voice command
▶

The system recognises a voice command
▶

The system plays a message
▶

▶ Voice command entry was stopped
Available list entries
B
Possible voice commands
C
Display other possible voice commands

177.
Fig. 178
Example of screen display
on page 132 There are basic voice
» Fig. 178.
Voice commands that can be issued, are indicated in "quotation marks".
sensor

Note
The display of the voice control symbols
equipment fitted also on the display of the instrument cluster.
Voice commands

Enter
The voice commands must only be issued when the
on the Infotainment screen and the input tone has completely faded. The in-
put tone can be switched on / off. To do so, tap the
the function surface  → Voice control.
It is not necessary to wait for the end of message playback when Infotainment
is playing a message. The Infotainment message can be acknowledged by tap-
ping the sensor field (does not apply to Infotainment Columbus) or press-

ing the button  on the multifunction steering wheel. Then a voice command
can be issued. The voice control is hereby much faster.
Stop
This allows for more time for input of the voice command (e.g. in the list of
visited contacts).
The process for the voice command input can be stopped by moving a finger
up/down across the screen or by turning the controller  (not applicable to In-
fotainment Columbus).
When stopping, the symbol changes from
Restore
The procedure for voice command input can be restarted in one of the follow-
ing ways.
▶ By tapping on the function surface .
By tapping the
▶
tainment Columbus).
By pressing the key  on the multifunction steering wheel.
▶
Not recognising a voice command
If a voice command is not detected three times in succession from Infotain-
ment, then the voice control is stopped.
» Fig. 178
A
to .

sensor field on the Infotainment (does not apply to Info-

Infotainment operation
are dependent of the
symbol is displayed

sensor field and then


133